MIE Attachments Offer Snow Plow / Earth Grader Blades For Tractors and Utility Vehicles of All Makes and Models.  Blades are Offered in Several Different Mounting Options:

- Quick Attach Subframe Mounted to Tractor Frame

- Loader Pin-On Mounting

- Universal Skid Steer Mounting

- JD Quick Attach Mounting

Blades are Available in Standard Duty or Heavy Duty Configurations.  Standard Duty Plow Blades Have Moldboards that are Constructed of 10-12 Guage Material, while Heavy Duty Blades Have Moldboards that are Constructed of 7 Guage Steel.

Customer Comments:

...the snowblade is from the fine folks at Michigan Iron and Equipment.  ....the blade uses the same hydrualic controls as the Loader.  You remove the Loader and Loader Arms, then install the blade.  The blade mounting has four flat pieces which remain on the tractor; these did not get in the way of anything else I did thoughout the summer.

..I have to compliment Michigan Iron and Equipment who had no problem putting together an order for shipment...when you compare to the treatment you might get from some...companies..with call centers doing their "cutomer service", dealing with a ...dedicated...company is a breath of fresh air.

I went with industrial tires instead of turf.....my Michigan Iron snowblade continues to work perfectly...the hydraualic angling is the cat's derrierre.

Jon. S

Nova Scotia, Canada

Subframe Mounted Plow Blades

Subframe Mounted Plow Blades are the Most Common Mounting System for Tractor Plow Blades. Subframe Mounting is Advantageous Over Loader Mounting Because it Brings the Blade in Closer to the Tractor and Distributes the Load of the Snow Through the Middle of the Tractor, Giving the Operator Much More Control While Plowing.

Subframe Systems Require the Front End Loader to be Dropped off of The Tractor if Applicable, and then Quick Attach to the Tractor Frame. One Pin in the Front of the Tractor and Two Pins on the Bottom Side of the Transmission Case are all that Need to be Pulled to Drop the Blade From the Tractor.

Hydraulic Lift and Angling are Standard on Subframe Mount Systems. These Hydraulic Functions are Controlled From the Front End Joystick on the Operator Platform.

Pictured 1st Row Left:      96" HD Plow Blade Subframe Mounted on KIOTI DK45SC

Pictured 1st Row Right:    Close-Up of 96" HD Plow Blade on KIOTI DK45SC

Pictured 2nd Row Left:     84" HD Plow Blade Subframe Mounted on KIOTI DK35SEC

Pictured 2nd Row Right:   60" HD Plow Blade Subframe Mounted on KIOTI CK20S

Pictured 3rd Row Left:      Close-Up of 60" HD Plow Blade Mounted on KIOTI CK20S

Pictured 3rd Row Right:    72" Standard Duty Plow Blade Subframe Mounted on KIOTI CK35

Pictured 4th Row Left:      66" Standard Duty Plow Blade Subframe Mounted on KIOTI CK20S

Pictured 4th Row Right:    KIOTI DK45SC in Action!

Subframe Mounted Plow Blade Pricing

Standard Duty Moldboard Models

Standard Duty Moldboard Models are Mounted on a 2" x 2" Steel Tube Subframe.

Blade Width	Horsepower Range	Moldboard Guage	Price*
66"	15HP - 25HP	14 Guage	$1975.00
72"	25HP - 35HP	11 Guage	$2095.00

Medium Duty Moldboard Models

Medium duty Moldboard Models are Mounted on a 2" x 2" Steel Tube Subframe.

Blade Width	Horsepower Range	Moldboard Guage	Price*
60"	20HP - 25HP	9 Guage	$2595.00
72"	25HP - 40HP	7 Guage	$2985.00

Heavy Duty Moldboard Models

Heavy Duty Moldboard Models are Mounted on a 3" x 2" Steel Tube Subframe.

Blade Width	Horsepower Range	Moldboard Guage	Price*
72"	35HP - 40HP	7 Guage	$3200.00
84"	40HP - 50HP	7 Guage	$3400.00
96"	45HP --> UP	7 Guage	$3600.00

Price* - Price Shown Includes All Hydraulics for Lift and Angling Functions on Blade. FEL  Valve is Required For Subframe Mounted Blades.

 UTV Plow Blades

Michigan Iron and Equipment also Specializes in Mounting Plow Blades to Utility Vehicles of all Makes and Models. Whether you have an existing Blade that needs Mounting or are Looking for an Entire Plow Blade Package for your Utility Vehicle, Michigan Iron and Equipment can help get you Pushing Snow.

Our Plow Blades are Fully Hydraulic and Mount on a Subframe, Unlike Many Utility Vehicle Plows Currently on the Market. This Provides a Heavier Mount Setup, Better Control of the Blade while Plowing, and Quicker Blade Lift. All Blades "Quick Attach" to your Vehicle in a Similar Fashion as Tractor Subframe-Mount Blades.

Pictured Above Left: Curtis Plow Blade with Full Hydraulic Lift and Angling on Kubota RTV 900

Pictured Above Right: 66" Plow Blade with Full Hydraulic Lift and Angling on Kawasaki Mule 610

Utility Vehicle Plow Blade Pricing

For Pricing on Utility Vehicle Plows Please Contact Michigan Iron and Equipment, as Many UTV Blades are Mounted on a "Custom" Basis, depending on how your vehicle is Equipped.

CUSTOM PLOW BLADE MOUNTING

Have an Existing Plow Blade you'd like Mounted on Your Tractor?  Michigan Iron and Equipment Specializes in the Custom Mounting of Any Blade to Any Tractor Make or Model.  Whether your prefer a Full Hydraulic Sub-frame Mount, Front Loader Pin-on, or Quick Attach, MIE can get you Plowing Quickly While Saving you Money over Buying an Entirely New Blade Setup.

Pictured Above Left: 84" Curtis Truck Plow Blade Subframe Mounted on a Branson 3510.

Pictured Above Right: Close-Up of Plow Blade Mount for Branson 3510 Shown to Left.

Custom Blade Mounting Pricing

For Pricing on Custom Mounting your Plow Blade Please Contact Michigan Iron and Equipment as Pricing will Depend on Tractor, Plow Blade, and Desired Mounting Type.

CK20 Step - $75.00

Logging Tongs - $45.99

      Rigging Blocks

4" 1000 Lb Cap. - $75.00

5" 1200 Lb Cap. - $83.00

4" Snatch Block - $26.95

4" Alum. Snatch Block

            $25.95

Shackles - From $5.75